Cycloidal pinwheel reducer is certainly a up-dated of latest type transmissing machine designed with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching system, which are trusted in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical Industry, conveyors, cranes and task machinery etc. various fields.
Features:

1. Equipment is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth area can reach HRC58-62. CNC grinding technology is adopted for all good contact performance, gears and with large precision
2. high transmission performance: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light weight, long service lifestyle and high bearing ability;
5. easy to check, assemble and disassemble.

Operation specifications and precautions
1.High modularization design: various equip with various motor or other power type conveniently.Same machine type may equip with various power motor. It really is easy to know the combination and
junction between every machine type.
2.Transmission ratio: fine division, wide scope. The combined machine type may form large transmission ratio, i.e. result suprisingly low rotary speed.
3.Form of installation: the positioning to be installed isn’t limited.
4.High strength, small: the box body is constructed of huge strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and great grinding process, which means bearing potential of unitvolume is high.
5.Long life: Beneath the condition of appropriate type chosen (including choosing suited operation parameters)normal operation and maintenance, the life span of main elements of speed reducer (except dressed in parts) shouldn’t be less than 20000 hours. The putting on parts include lubricating oil seal, oil and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is usually low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High swiftness ratio and efficiency
Single stage transmission can reach to at least one 1:87 of speed-downward ratio and the efficiency is usually more than 90%. If employ multi-speed drive the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic tranny basic principle, the input and output shaft are at same axis center, it is compact.
3. Smooth and secure run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be obtained.The structure is simple, but it can realize high reduction ratio gadget.
2. Small gear clearance
The Get, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are several gears engaged with 180 degree symmetry. So, the influence of tooth pitch error and cumulative tooth pitch mistake on the rotation accuracy is relatively average, making the positioning precision and rotation precision reach an extremely high level.
4. Less parts, convenient installation
The three basic elements achieve a higher deceleration ratio, and they are all on the same axis, therefore the kit is simple to install and simple to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the volume is 1/3, the fat is 1/2, but can buy the same torque ability and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel materials USES distinctive steel with large fatigue strength.Different from ordinary transmission system, the number of teeth meshing accounts for on the subject of 30% of the full total amount of teeth. In addition, it is in get in touch with with the surface, so that the pressure borne by each gear is reduced and large torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the energy loss caused by friction. Therefore, high decrease ratio may be accomplished while maintaining high proficiency, and miniaturization of generating motor could be realized.
8. Low noise
The apparatus meshing cycle velocity is low, the transmission motion force balance, which means procedure is quiet, and the vibration is very small.
◆Great speed ratio and high efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is a lot more than 90%. If multi-stage transmission is used, the deceleration ratio will end up being larger.
◆Because planetary transmission basic principle is adopted, the type shaft and productivity shaft are on a single axis line, so that the machine version can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts makes the vibration and voice limited to a minimum.
◆Reliable use and extended service life for the reason that main parts are made of large carbon chromium steel, great strength is certainly obtained by quenching (HRC58-62), and rolling friction is used in some transmission contacts, therefore the service life is prolonged.
Cycloid reducer is usually a cycloid needle teeth meshing planetary transmission principle drive models, is a perfect transmission has many advantages, versatile, and will be both negative and positive operation.

•Big ratio, and great efficiency Smooth operation,

• low noise The usage of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the utilization of a planetary transmitting, the source shaft and the outcome shaft on a single axis, making the model to obtain the smallest possible size.

• Reasonable design, easy protection, and break down easily install,

• the least number of parts together with basic lubrication, cycloid reducer trusted by the user.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion increase the output strength, precision and carrier.

(2).Hoop clamp coupling have five connection ways ideal for different application environments.

(3).Size over PL/PF120(including)precision and high power integral inner gear housing, processed in one station,which eradicate the cumulative error and assembling mistake of split type.Remove casting process;adopt scorching of forging process, which will decrease the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which simpler to make gear surface area smooth and high precision,decrease the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, which have a complete norm, wide speed for selection, and several mounting positions. Its effectiveness and mounting dime nsions conform the same sorts of foreign.
The combination of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, radiate heat efficiently, beautiful form and low noise.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator may meet all kinds of speed requirement.