High-Quality Right Angle Gear Drives are made for efficiency, quiet procedure, and long service existence. SDP/SI offers a broad collection of Right Angle Gear Drives in various configurations, materials, operating speeds, and multiple ratios. Standard catalog products include precision and commercial quality gear drives provided in both ” and metric sizes. For adjustments or custom designs contact and talk with a SDP/SI applications engineer.
Our providing includes, but isn’t limited to the following:
Miniature sized Right Angle Gear Drives, 1 ” square, are perfect for compact designs that require low backlash and insight speeds up to 2000 rpm.
When weight can be an issue, get Right Angle Bevel Equipment Drives that include a lightweight casing of PTMT Polyester 30% glass filled, precision floor stainless steel shafts, sintered bronze bearings and molded nylon gears.
Right Angle Worm Equipment Drives accommodate input boosts to 2000 rpm and are obtainable in gear ratios: 5:1, 10:1 and 20:1.
Right Angle and Dual Helical Gear Drives are offered in two models, light-duty, rated boosts to 600 rpm and durable, rated speeds up to 1725 rpm.
An economy series of Right Angle Bevel Gear Drives emerges in 1:1 and 2:1 ratios and rated speeds up to 500 rpm.
E Series Right Angle
The Ever-Power E Series is a high efficiency, right angle gear reducer made for increased torque density, reduced inventory and improved efficiency. By utilizing modified helical-bevel technology, the E Series can operate at 90% effectiveness and can offer up to 60% higher torque when compared to a typical worm equipment reducer. Through various components and modular elements, the Electronic Series recreates the essential dimensions of a typical worm gearbox and provides the chance to reduce inventory.
Right-angle Worm Gearboxes
4 sizes available with rankings to 27 HP.
Available in single, dual & triple reduction.
Ratings from 7.8:1 to 59:1.
EP-worm-gearboxsEP Series variants, worm gear family
Ever-Power has been in the forefront of developing equipment technology to fill certain requirements of our OEM customers. Our close partnerships with this installed customer foundation provided much insight into their evolving need for more high-precision right-position gearing options. In order to fill that need, Ever-Power extended upon our right angle product offering to include a number of high-precision worm gearboxes, referred to as our EP Series.
These servo grade speed reducers are well suited for the most challenging of movement control applications. Each series incorporates a globoidal worm equipment mesh design to be able to attain the torque handling capability and the best levels of precision our SHIMPO customers have come to anticipate from us. The insight style of our EP right-angle gearbox applies the same concept of motor modularity that is common across our High Precision item family, meaning our clients and distribution partners get the same degree of flexibility, product variety, and overall availability that’s unparalleled in your industry.
Advantages of the EP Series platform design;
Quiet operation, in comparison to other competitive worm gearing
Compact, with precise reduction ratios
High torsional rigidity and torque carrying capacity
A lower life expectancy backlash feature, unique among right-angle gearheads
Industry regular hollow bore output with other shafted options
Extremely lightweight, optimized construction
Free of maintenance, lubrication for lifetime
These right-angle servo grade gearboxes are well suited for applications within custom assembly and test systems, packaging equipment, metallic cutting and steel forming machinery, general purpose auto, among many others. If your application requires the compact footprint of a right-angle worm gear without sacrificing on the performance, contact Ever-Power about the EP Series today.
Standard Right Angle Gearbox Features
All ratios built with right-hand worm gears
Load capacity unaffected simply by direction and rotation
Variety of mounting Options
Upon Request:
Left-Hand Gears
STAINLESS Input/Output Shafts
Solid or Hollow Output Shaft
Decide on a Gearbox or Speed Reducer
Worm Gear Swiftness Reducers
sw-1-parent.jpg
SW-1
SWB-5 & SW-5
Right Angle Miter Gear Drives
miter-gear-parent.jpg
Miter Gear Drives
Mini Right Angle Helical Gear Drives
miniature-right-angle-parent.jpg
RA-200
RA-300
Custom Speed Reducers
custom-speed-reducer-parent.jpg
Custom Speed Reducers
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor performance is important. Contact our technical sales staff for help determining which gearbox remedy is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers are designed with a hollow bore and invite for a corner turn with optional dual output. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were right angle worm gearbox created with five mounting choices providing flexibility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The right angle bevel gearbox combines the top features of our right angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest procedure of our swiftness reducers. These gearboxes are designed to manage varying loads with small backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we have a solution to fit your needs. Our 52 frame size can be available with plastic-type gears for noise-sensitive applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest performance and best result torque of most our rate reducers. These gearboxes are made to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio options ranging from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the top choice for continuous duty applications. Their equipment cluster design provides a highly effective method for dissipating warmth. Parallel shaft gearboxes possess the shortest length of our inline gear reducer options therefore they work well in environments with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, acceleration reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a gear in the type of a screw, also referred to as a worm, meshes with a worm equipment. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A main benefit of worm equipment reducers is definitely that they generate an output that’s 90° from the insight and can be used to transmit higher 
torque or reduce rotational speed. Frequently, a worm gearbox provides right hand threads; to improve the direction of the output, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
Cast Iron Worm Equipment Reducers can be found in center distances 1.33 – 3.25 inches in ratio’s from 5:1 to 60:1. The units have a one piece #Fc20 all cast iron housing, NEMA motor quill style insight flanges or shaft inputs, come pre-stuffed with synthetic oil and also have a 12 months warranty.
Features:
Tapered roller bearings upon the input and output shafts
Embedded double-lip oil seals
Anti-rust primer applied inside and outside of the gearbox
Air dry special black paint
Product Specifications
OUTPUT SPEED (RPM) 175
OVERHUNG LOAD LBS. 300
EFFICIENCY 86
BRAND EP
MANUFACTURERS PART Quantity HdRS133-10/1-R
CROSS REFERENCE Boston 713; Grove B213
DESCRIPTION Cast Iron Correct Ange Worm Gear Reducer
BACKLASH (FT.) (ANGULAR Moments) 27
OUTPUT SHAFT THRUST LOAD (Pounds.) 300
MAX INPUT HP 0.77
MAX TORQUE (IN-LBS.) 247
WCD CENTER INCHES 1.33
GEAR RATIO 10:1
Ever-Power EP series triple-reduction worm gear acceleration reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Output torque ranges from 33,000 in lbs. for the 7” CD EP-70 to 582,900 in lbs for the EP-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are well suited for water/waste-water tools drive applications such as for example thickeners and clarifiers, which need a vertical straight down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for use on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or materials handling systems where huge torques/slow speeds are needed.
These reducers are also offered with a helical main reduction stage and so are termed the HDVM series
Enclosed Gears / Gearboxes
Enclosed gears, also referred to as gearboxes or acceleration reducers, are open gears within a housing. The housing facilitates bearings and shafts, retains in lubricants, and protects the components from surrounding circumstances. Gearboxes are available in an array of load capacities and speed ratios.
The purpose of a gearbox is to improve or reduce speed. Because of this, torque output will be the inverse of the function. If the enclosed drive is a rate reducer, the torque result will increase; if the drive increases speed, the torque output will reduce. Gear drive selection factors include: shaft orientation, rate ratio, design type, character of load, gear rating, environment, mounting position, working temperature range, and lubrication.
Basic Types of Gearboxes
Worm Gear Speed Reducers
A single reduction quickness reducer can achieve up to 100:1 decrease ratio in a little package. Referred to as right position drives, these contain a cylindrical worm with screw threads and a worm. With a single begin worm, the worm equipment advances only 1 tooth for each 360-degree convert of the worm. So, whatever the worm’s size, the gear ratio may be the ‘size of the worm gear to 1′. Higher reduction ratios can be created through the use of double and triple reduction ratios.
Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 pieces of gears. Power is transmitted from a high-velocity pinion to a slower-speed equipment. Helical gears generally operate with their shafts parallel to one another. The two most common types will be the concentric (input and result shafts are in series) and parallel shaft (insight and result shafts are offset). Single-stage helical equipment reducers are usually used for gear ratios up to about 8:1. Where cheaper speeds and higher ratios are necessary, dual, triple, and quadruple gear reduction stages can be used.