Tag Archives: hydraulic

China ISO16028 FF Series Flat Face 1″ Steel Hydraulic Quick Couplings capacitive coupling

Item Description

ISO16571 FF collection Flat Experience  1″ Metal Hydraulic Rapid Couplings

Product Introduction:

Body Dimension(in) 1/4(02) three/8(03) 1/2(04) 5/8(06) three/4(08) 1(ten) one-1/2(12) 2(sixteen)
Rated Strain(PSI) 5000 3000 3000 3000 3000 3000 3000 3000
Rated Stream(GPM) 3 six twelve 20 28 fifty 80 a hundred
Spillage (ML) .006 .012 .02 .026 .032 .035 .05 .one
(max. for every disconnect)
Temperature Range -20ºC to +120ºC
Standard seal materials NBR

one.Materials:
                 Material of Feminine Socket: Zinc- Chromate plated Metal
                 Material of Male Plug: Zinc- Chromate plated Steel
2. Benefit: Critical Components are hardened for longevity.
                       Poppet valves are offered to stop uncoupled leakage.
                       Poppet valves open instantly when coupled inside of rated operating strain to maintain the stream expeditely.
three. Measurements: NPT 1/4, 3/8, 1/2, 3/4, 1. It is Alright to buy Female Socket and Male Plug collectively or seperately.
four. Normal: ISO7241-1 Series A
Interchangeable with:
PARKER 6600 collection
More rapidly ANV collection
AEROQUIP 5600 collection
HANSEN HA 15000 series
What is Provided:
* Female Coupler
* Male Coupler

Primary Substance and Collection:
Carbon steel,Brass, Stainless steel 304/316
ISO 7241A Sequence ,ISO 7241B Sequence ,FLAT Face COUPLING

Our Provider: We can crimp hose assembly for our consumers

Application:
Mostly utilized for building tools, hydraulic machinery, oil euipment and other hydraulic purposes.

FAQ:
Conventional packaging: carton, can be tailored in accordance to consumer demands
Transportation: specific, sea and air freight are assistance
Delivery Time:
one.If we have inventory,we’ll send out to you in a week
2. Generally, it will take about twenty times. The specific shipping date will be negotiated in accordance to your purchase.
MOQ:a hundred
(If the amount you require is considerably less than a hundred parts, please truly feel cost-free to make an inquiry with us. If we have inventory, you can also
order.)
Payment:LC/TT
 our payment  usual is T/T ,L/C ,if you need other payment , make sure you inform us

US $2-100
/ Piece
|
500 Pieces

(Min. Order)

###

Standard: ISO
Material: Carbon Steel,Stainless Steel,Brass
Connection: Female
Surface Treatment: Galvanized Sheet
Head Type: Hexagon
Usage: Connecting with Hydraulic Hoses

###

Customization:

###

Body Size(in) 1/4(02) 3/8(03) 1/2(04) 5/8(06) 3/4(08) 1(10) 1-1/2(12) 2(16)
Rated Pressure(PSI) 5000 3000 3000 3000 3000 3000 3000 3000
Rated Flow(GPM) 3 6 12 20 28 50 80 100
Spillage (ML) 0.006 0.012 0.02 0.026 0.032 0.035 0.05 0.1
(max. per disconnect)
Temperature Range -20ºC to +120ºC
Standard seal material NBR
US $2-100
/ Piece
|
500 Pieces

(Min. Order)

###

Standard: ISO
Material: Carbon Steel,Stainless Steel,Brass
Connection: Female
Surface Treatment: Galvanized Sheet
Head Type: Hexagon
Usage: Connecting with Hydraulic Hoses

###

Customization:

###

Body Size(in) 1/4(02) 3/8(03) 1/2(04) 5/8(06) 3/4(08) 1(10) 1-1/2(12) 2(16)
Rated Pressure(PSI) 5000 3000 3000 3000 3000 3000 3000 3000
Rated Flow(GPM) 3 6 12 20 28 50 80 100
Spillage (ML) 0.006 0.012 0.02 0.026 0.032 0.035 0.05 0.1
(max. per disconnect)
Temperature Range -20ºC to +120ºC
Standard seal material NBR

Types of Couplings

A coupling is a device that connects two shafts and transmits power from one to the other. Its main purpose is to join two pieces of rotating equipment. It also allows for some degree of misalignment or end movement. Here are a few examples of coupling types: Beam coupling, Flexible coupling, Magnetic coupling, and Shaft coupling.
gearbox

Beam coupling

Beam couplings are used to couple motors and other devices. They are available in several types, including flexible, slit, and rigid beam couplings. Each has unique properties and characteristics. These couplings are best for applications requiring a high level of precision and long life. They are also a practical solution for the connection of stepping and servo motors with screw rods.
Beam couplings are usually made of stainless steel or aluminum alloy, and feature spiral and parallel cut designs. Multiple cuts allow the coupling to accommodate multiple beams and improve angular and parallel misalignment tolerances. Additionally, beam couplings are comparatively cheaper than other types of rotary joints, and they require minimal maintenance.
The materials of a beam coupling should be considered early in the specification process. They are typically made of aluminum or stainless steel, but they can also be manufactured from Delrin, titanium, and other engineering grade materials. Beam couplings are often available in multiple sizes to fit specific shaft diameters.
Beam couplings are a key component of motion control systems. They provide excellent characteristics when used properly, and they are a popular choice for many applications. A thorough understanding of each type of coupling will help to prevent coupling failure and enhance system performance. Therefore, it is important to choose the right coupling for your application.
Various types of beam couplings have unique advantages and disadvantages. The FCR/FSR design has two sets of three beams. It is available in both metric and inch shaft sizes. The FCR/FSR couplings are ideal for light-duty power transmission applications. A metric shaft is more suitable for these applications, while an inch shaft is preferred for heavier duty applications.
Two types of beam couplings are available from Ruland. The Ruland Flexible beam coupling has a multi-helical cut design that offers a greater flexibility than commodity beam couplings. This design allows for higher torque capabilities while minimizing wind-up. In addition, it is also more durable than its commodity counterparts.

Flexible coupling

A flexible coupling is a versatile mechanical connection that allows for the easy coupling of two moving parts. The design of these couplings allows for a variety of stiffness levels and can address a variety of problems, such as torsional vibrations or critical speed. However, there are a number of tradeoffs associated with flexible couplings.
One of the biggest issues is the installation of the coupling, which requires stretching. This problem can be exacerbated by cold temperatures. In such a case, it is vital to install the coupling properly. Using a gear clamp is one of the most important steps in a successful installation. A gear clamp will keep the coupling in place and prevent it from leaking.
Another common type of flexible coupling is the gear coupling. These couplings are composed of two hubs with crowned external gear teeth that mesh with two internally splined flanged sleeves. The massive size of the teeth makes them resemble gears. Gear couplings offer good torque characteristics but require periodic lubrication. These couplings can also be expensive and have a limited number of applications.
Another type of flexible coupling is the SDP/SI helical coupling. These couplings can accommodate axial motion, angular misalignment, and parallel offset. This design incorporates a spiral pattern that makes them flexible. These couplings are available in stainless steel and aluminum.
A flexible coupling has a wide range of applications. Generally, it is used to connect two rotating pieces of equipment. Depending on its design, it can be used to join two pieces of machinery that move in different directions. This type of coupling is a type of elastomeric coupling, which has elastic properties.
There are many types of flexible couplings available for different types of applications. The purpose of a flexible coupling is to transmit rotational power from one shaft to another. It is also useful for transmitting torque. However, it is important to note that not all flexible couplings are created equally. Make sure to use a reputable brand for your coupling needs. It will ensure a reliable connection.
The simplest and most commonly used type of flexible coupling is the grid coupling. This type of coupling uses two hubs with slotted surfaces. The steel grid is allowed to slide along these slots, which gives it the ability to flex. The only limitation of this type of coupling is that it can only tolerate a 1/3 degree misalignment. It can transmit torques up to 3,656 Nm.
gearbox

Magnetic coupling

Magnetic coupling is a technique used to transfer torque from one shaft to another using a magnetic field. It is the most common type of coupling used in machinery. It is highly effective when transferring torque from a rotating motor to a rotating shaft. Magnetic couplings can handle high torques and high speeds.
Magnetic coupling is described by the energy difference between a high-spin state and a broken symmetry state, with the former being the energy of a true singlet state. In single-determinant theories, this energy difference is called the Kij. Usually, the broken-symmetry state is a state with two interacting local high-spin centers.
The magnetic coupling device is regarded as a qualitative leap in the reaction still industry. It has solved a number of problems that had plagued the industry, including flammability, explosiveness, and leakage. Magnetic couplings are a great solution for many applications. The chemical and pharmaceutical industries use them for various processes, including reaction stills.
Magnetic couplings are a good choice for harsh environments and for tight spaces. Their enclosed design keeps them fluid and dust-proof. They are also corrosion-resistant. In addition, magnetic couplings are more affordable than mechanical couplings, especially in areas where access is restricted. They are also popular for testing and temporary installations.
Another use for magnetic coupling is in touch screens. While touch screens use capacitive and resistive elements, magnetic coupling has found a cool new application in wireless charging. While the finger tracking on touch screens may seem like a boley job, the process is very sensitive. The devices that use wireless charging need to have very large coils that are locked into resonant magnetic coupling.
Magnetic couplings also help reduce hydraulic horsepower. They cushion starts and reduce alignment problems. They can also improve flow in oversized pumps. A magnetic coupling with an 8 percent air gap can reduce hydraulic HP by approximately 27 percent. In addition, they can be used in aggressive environments. They also help reduce repair costs.
Magnetic couplings are a great choice for pumps and propeller systems because they have the added advantage of being watertight and preventing shaft failure. These systems also have the benefit of not requiring rotating seals.
gearbox

Shaft coupling

A shaft coupling joins two shafts and transmits rotational motion. Generally, shaft couplings allow for some degree of misalignment, but there are also torque limiters. Selecting the right coupling can save you time and money and prevent equipment downtime. Here are the main features to consider when purchasing a coupling for your application.
Shaft couplings should be easy to install and disassemble, transmit full power to the mated shaft, and reduce shock loads. A shaft coupling that does not have projecting parts should be used for machines that move or rotate at high speeds. Some types of shaft couplings are flexible while others are rigid.
Shaft couplings can be used in a variety of applications, including piping systems. They can be used to connect shafts that are misaligned and help maintain alignment. They can also be used for vibration dampening. Shaft couplings also allow shafts to be disconnected when necessary.
Shaft couplings can accommodate a certain amount of backlash, but this backlash must be well within the tolerance set by the system. Extremely high backlash can break the coupling and cause excessive wear and stress. In addition, excessive backlash can lead to erratic alignment readings. To avoid these issues, operators must reduce backlash to less than 2deg.
Shaft couplings are often referred to by different names. Some are referred to as “sliced” couplings while others are known as “slit” couplings. Both types offer high torque and torsional stiffness. These couplings are typically made from metals with various alloys, such as acetal, stainless steel, or titanium.
CZPT Pulley produces shaft couplings for a variety of applications. These products are used in high-power transmission systems. They have several advantages over friction couplings. In addition to minimizing wear, they don’t require lubrication. They are also capable of transmitting high torque and high speeds.
Another type of shaft coupling is the universal coupling. It is used to transmit power to multiple machines with different spindles. Its keyed receiving side and flanges allow it to transmit power from one machine to another.
China ISO16028 FF Series Flat Face 1China ISO16028 FF Series Flat Face 1
editor by czh 2022-12-28

China Hydraulic Quick Release Coupling ISO 16028 coupling brass

Item Description

 KSP1
Standard            : ISO 16571
Materials            : zn/zn-ni plated carbon steel body
Seals                  : normal in nitrile NBR. On request FKM,PU&EPDM seals Again-up ring : PTFE
Functioning temp: with common seals – 25°C + one hundred twenty five °C

Dimensions ISO L1 L2 L3 Φ D S1 S2 T COD.(F) COD.(M)
four 6.three 96.seven 59 48 28 22 22 one/4″BSP KSP1-04-04F-BSP KSP1-04-04M-BSP
                                  1/4″NPT KSP1-04-04F NPT KSP1-04-04M-NPT
            22 24 3/S”BSP KSP1-04-06F-BSP KSP1-04-06M-BSP
                three/S”NPT KSP1-04-06F-NPT KSP1-04-06M-NPT
6 10 119 67.3 67.five 32 27 27 three/S”BSP KSP1-06-06F-BSP KSP1-06-06M-BSP
three/8″NPT KSP1-06-06F-NPT KSP1-06-06M-NPT
                1/2″BSP KSP1-06-08F-BSP KSP1-06-08M-BSP
                one/2″NPT KSP1-06-08F-NPT KSP1-06-08M-NPT
8 12.5 139 83 73 38 32 32 1/2″BSP KSP1-08-08F-BSP KSP1-08-08M-BSP
1/2″NPT KSP1-08-08F-NPT KSP1-08-08M-NPT
            36 36 three/4″BSP KSP1-08-12F-BSP KSP1-08-12M-BSP
three/4″NPT KSP1-08-12F-NPT KSP1-08-12M-NPT
12 20 160 95.five 86 48 46 41 three/4″BSP KSP1-12-12F-BSP KSP1-12-12M-BSP
three/4″NPT KSP1-12-12F-NPT KSP1-12-12M-NPT
                one”BSP KSP1-12-16F-BSP KSP1-twelve-16M-BSP
1″NPT KSP1-12-16F-NPT KSP1-12-16M-NPT
16 25 178 110 90.5 55 50 50 one”BSP KSP1-16-16F-BSP KSP1-16-16M-BSP
one”NPT KSP1-16-16F-NPT KSP1-16-16M-NPT
            55 55 one-1/4″BSP KSP1-16-20F-BSP KSP1-sixteen-20M-BSP
one-1/4″NPT KSP1-16-20F-NPT KSP1-sixteen-20M-NPT

Standard: ISO
Material: Medium Carbon Steel
Connection: Male+Female
Surface Treatment: Zinc Plating
Head Type: Round
Other Companies′ Part Number: Parker Fem,Faster 2ffi,Stucchi Firg,Eaton FF

###

Samples:
US$ 0/Set
1 Set(Min.Order)

|
Request Sample

###

SIZE ISO L1 L2 L3 Φ D S1 S2 T COD.(F) COD.(M)
4 6.3 96.7 59 48 28 22 22 1/4"BSP KSP1-04-04F-BSP KSP1-04-04M-BSP
                                  1/4"NPT KSP1-04-04F NPT KSP1-04-04M-NPT
            22 24 3/S"BSP KSP1-04-06F-BSP KSP1-04-06M-BSP
                3/S"NPT KSP1-04-06F-NPT KSP1-04-06M-NPT
6 10 119 67.3 67.5 32 27 27 3/S"BSP KSP1-06-06F-BSP KSP1-06-06M-BSP
3/8"NPT KSP1-06-06F-NPT KSP1-06-06M-NPT
                1/2"BSP KSP1-06-08F-BSP KSP1-06-08M-BSP
                1/2"NPT KSP1-06-08F-NPT KSP1-06-08M-NPT
8 12.5 139 83 73 38 32 32 1/2"BSP KSP1-08-08F-BSP KSP1-08-08M-BSP
1/2"NPT KSP1-08-08F-NPT KSP1-08-08M-NPT
            36 36 3/4"BSP KSP1-08-12F-BSP KSP1-08-12M-BSP
3/4"NPT KSP1-08-12F-NPT KSP1-08-12M-NPT
12 20 160 95.5 86 48 46 41 3/4"BSP KSP1-12-12F-BSP KSP1-12-12M-BSP
3/4"NPT KSP1-12-12F-NPT KSP1-12-12M-NPT
                1"BSP KSP1-12-16F-BSP KSP1-12-16M-BSP
1"NPT KSP1-12-16F-NPT KSP1-12-16M-NPT
16 25 178 110 90.5 55 50 50 1"BSP KSP1-16-16F-BSP KSP1-16-16M-BSP
1"NPT KSP1-16-16F-NPT KSP1-16-16M-NPT
            55 55 1-1/4"BSP KSP1-16-20F-BSP KSP1-16-20M-BSP
1-1/4"NPT KSP1-16-20F-NPT KSP1-16-20M-NPT
Standard: ISO
Material: Medium Carbon Steel
Connection: Male+Female
Surface Treatment: Zinc Plating
Head Type: Round
Other Companies′ Part Number: Parker Fem,Faster 2ffi,Stucchi Firg,Eaton FF

###

Samples:
US$ 0/Set
1 Set(Min.Order)

|
Request Sample

###

SIZE ISO L1 L2 L3 Φ D S1 S2 T COD.(F) COD.(M)
4 6.3 96.7 59 48 28 22 22 1/4"BSP KSP1-04-04F-BSP KSP1-04-04M-BSP
                                  1/4"NPT KSP1-04-04F NPT KSP1-04-04M-NPT
            22 24 3/S"BSP KSP1-04-06F-BSP KSP1-04-06M-BSP
                3/S"NPT KSP1-04-06F-NPT KSP1-04-06M-NPT
6 10 119 67.3 67.5 32 27 27 3/S"BSP KSP1-06-06F-BSP KSP1-06-06M-BSP
3/8"NPT KSP1-06-06F-NPT KSP1-06-06M-NPT
                1/2"BSP KSP1-06-08F-BSP KSP1-06-08M-BSP
                1/2"NPT KSP1-06-08F-NPT KSP1-06-08M-NPT
8 12.5 139 83 73 38 32 32 1/2"BSP KSP1-08-08F-BSP KSP1-08-08M-BSP
1/2"NPT KSP1-08-08F-NPT KSP1-08-08M-NPT
            36 36 3/4"BSP KSP1-08-12F-BSP KSP1-08-12M-BSP
3/4"NPT KSP1-08-12F-NPT KSP1-08-12M-NPT
12 20 160 95.5 86 48 46 41 3/4"BSP KSP1-12-12F-BSP KSP1-12-12M-BSP
3/4"NPT KSP1-12-12F-NPT KSP1-12-12M-NPT
                1"BSP KSP1-12-16F-BSP KSP1-12-16M-BSP
1"NPT KSP1-12-16F-NPT KSP1-12-16M-NPT
16 25 178 110 90.5 55 50 50 1"BSP KSP1-16-16F-BSP KSP1-16-16M-BSP
1"NPT KSP1-16-16F-NPT KSP1-16-16M-NPT
            55 55 1-1/4"BSP KSP1-16-20F-BSP KSP1-16-20M-BSP
1-1/4"NPT KSP1-16-20F-NPT KSP1-16-20M-NPT

Types of Couplings

A coupling is a device that connects two shafts together. It transmits power from one end to another and is used for joining rotating equipment. A coupling is flexible and can accommodate a certain amount of end movement and misalignment. This allows for more flexibility in applications. Various types of couplings are available, and each one serves a specific purpose.
gearbox

Shaft couplings

There are many types of shaft couplings, and they are used in a wide range of applications. The type you need depends on the torque, speed, and horsepower you need, as well as the size of the shaft and its spatial limitations. You may also need to consider whether the coupling will accommodate misalignment.
Some shaft couplings are flexible, while others are rigid. Flexible couplings can accommodate up to two degrees of misalignment. They are available in different materials, including aluminum, stainless steel, and titanium. They can also be known by different names, depending on the industry. Some couplings can also be used in a single or multiple-shaft application.
The first type of shaft coupling is a rigid coupling, which consists of two parts that fit together tightly around the shafts. These couplings are designed to have more flexibility than sleeved models, and they can be used on fixed shafts as well. The flanged coupling, on the other hand, is designed for heavy loads and is made of two perpendicular flanges. The flanges are large enough to accommodate screws and are generally used with heavy-duty applications.
CZPT shaft couplings are a great choice if you’re looking for a shaft coupling that delivers high performance, durability, and low cost. These metal disc-style couplings provide low backlash and high torsional stiffness. Their high misalignment tolerance reduces reaction loads on connected components, which makes them ideal for high-speed precision applications. Available in single and double-disc models, they have torque ratings of up to 2,200 in-lbs. (250N) and are available in fourteen sizes.
When using shaft couplings, it is important to choose the right type for your application. Backlash can cause a shaft coupling to break or become unusable. In order to prevent this from happening, you should replace worn or loose parts, and ensure that the hub and key are evenly positioned with the shaft. If you’re using a shaft coupling in a motion-control system, it is important to keep the torque level consistent.

Flexible couplings

Flexible couplings are a type of coupling used to connect two shafts. They are made of rubber or plastic and allow for axial movement of the connected equipment. They do not require lubrication and are resistant to fatigue failure. Flexible couplings are useful for a number of applications. A common type of flexible coupling is the gear coupling, which has gear teeth inside its sleeve. Another type of flexible coupling is the metallic membrane coupling. A metallic membrane coupling is flexible due to flexing metallic discs.
One major disadvantage of flexible couplings is their inability to fit certain types of pipe. This is because most couplings need to be stretched to fit the pipe. This problem is often the result of a change in pipe technology. Traditionally, drain and soil pipe is made of ductile iron or cast iron. Today, most pipes are made of PVC, which has a larger outside diameter than either cast or ductile iron. Because of these changes in pipe technology, many coupling manufacturers have not updated their mold sizing.
Flexible couplings can be either metallic, elastomeric, or a combination of the three. While there are some common characteristics of each type, you should always consider the tradeoffs of each type before choosing one. Generally, the most important considerations when selecting a flexible coupling are torque, misalignment, and ease of assembly and maintenance.
Flexible couplings are used in a wide range of industries. They are useful for connecting two pipes to ensure torque transfer. Although the types available are different, these are the most adaptable couplings in the market. They can withstand movement, vibration, and bending without causing any damage to the piping.
gearbox

Clutch couplings

A clutch coupling connects two rotating shafts by friction. The clutch engages power when the engine is running, disengaging power when the brake is applied. Clutch couplings are used in applications where the speed of a machine is variable or where continuous service is required. The clutch can transmit power, torque, and axial force.
Clutch couplings come in a variety of styles and configurations. Some couplings are flexible, while others are rigid. Flexible couplings are available in a variety of materials, including stainless steel and aluminum. Some couplings also have a non-backlash design, which helps compensate for misalignment.
Clutch couplings may be synchronous or asynchronous. Synchronous couplings engage and disengage automatically when the driven machine exceeds its output speed. These couplings are synchronized by a synchronizing mechanism. When the output speed is exceeded, the synchronizing mechanism initiates the engagement process. The synchronizing mechanism does not engage or disengage when the output speed drops.
High speed clutches are available from a variety of manufacturers. Some manufacturers offer OEM assembly, repair services, and third-party logistics. These manufacturers serve the automotive, chemical, food, and wood industries, as well as the oilfield and material handling industries. Custom clutches can be manufactured for specific applications and can be fitted with additional features, such as precision machined teeth or keyway slots and grooves.
Couplings are available in PCE, C/T, and metric bores. Typically, the size of the input and output shafts will determine which type of coupling is needed. In addition, clutches may be configured for intermediate or high speeds, depending on the required torque.

Clamped couplings

Clamped couplings are commonly used in a variety of industries. They can be used in medical equipment, dental equipment, military equipment, laboratory equipment, and in precision industrial controls. They are available in a wide variety of sizes and keyways. This type of coupling offers a number of advantages, including ease of installation and quick and easy replacement.
A clamp coupling connects two parts by compressing them together. The clamping elements can be formed in a variety of ways, but they all have a gap between their surfaces. This friction squeezes the two parts together, much like pulling two rubber gloves apart. This type of coupling is also useful for joining two hoses or piping units.
Clamped couplings are designed with a single or double clamping shaft. The clamping parts are mounted in two halves and are held together by eight socket head cap screws. They offer high torque capacity and require little installation space. Their high rigidity ensures good positioning accuracy, making them ideal for dynamic drives. In addition, they are wear-free and offer simple radial assembly.
The invention relates to a method and system for clamping pipes to a tank vessel. This invention also relates to a method of loading and unloading tank vessels. The method can be used in oil production platforms and other platforms. A single point mooring method is also used in oil production platforms.
Clamped couplings can also be flexible. They can join two shafts together while allowing a small amount of end movement and misalignment. These couplings may also be used in the assembly of motors and gearboxes.
gearbox

CZPT’s coupling

CZPT couplings are designed to be flexible, allowing them to accommodate misaligned shafts and transmit torque in either direction. They are made with three discs, two hubs, and a center that are arranged with grooves and fins. These features allow for two degrees of freedom during assembly, and can accommodate misalignment of up to 5% of the shaft diameter.
CZPT couplings have many uses. For example, they can be used to join two parallel coaxial rotating shafts. Their ability to transmit torque at the same rotation mechanism and speed makes them ideal for applications where electrical currents may be a problem. Because the couplings are not made of metal, they are electrically isolated. Designers should test their couplings during the prototype stage to ensure they are working properly.
The CZPT coupling consists of two hubs with one slot on each. An intermediate disk is located between the two hubs. The discs are used to reduce or prevent wear on other machine parts. CZPT couplings are inexpensive and easy to replace. They also have electrical insulation, which makes them easy to repair or replace.
CZPT couplings are a popular choice for stepper motor-driven positioning stages. The plastic center disc offers electrical isolation and absorbs shocks from frequent start/stops. These couplings are available in through-hub and blind-bore styles and can be installed in many applications.
CZPT couplings also allow for small degrees of shaft misalignment. This allows them to function in systems where shaft access is limited. They are easily removed without tools.
China Hydraulic Quick Release Coupling ISO 16028     coupling brassChina Hydraulic Quick Release Coupling ISO 16028     coupling brass
editor by czh 2022-12-14

China Factory Stainless Steel Hydraulic Coupler Quick Joint Quick Release Coupling coupling brass

Solution Description

1. Products Data

Item Identify Manufacturing facility Stainless metal Hydraulic coupler swift joint rapid release coupling
Substance Stainless Metal, Carbon Metal
Physique Variety Straight, Elbow, 45 degree, ninety diploma
Brand YC-LOK, or in accordance to your demands
Thread System Metric,ISO Tapered, NPT, BSPP, BSPT, JIS, SAE,UNF, G, R, JIC
Link Area Multiseal, Flat, Flat O-Ring, Cone Seat
Cleaning Process Standard Cleaning and Packaging

1. OEM and ODM orders are acceptable.Any sort of brand printing or layout are optional.
two. Our connector tube fittings good quality and provider are ensured by our business philosophy of obligation.
3. Skilled engineers and innovative equipments ensure our goods of substantial good quality.

2. Photos for reference

three. Business Profile

4. Packing and Shipping and delivery
Packing
@ As for each customer’s specified demands
@ Common Export Packing:Carton+Pallet
Shipping and delivery
@ Small purchase: By categorical, TNT/ DHL/ UPS/ Fedex etc.
@ Large order: By sea or By air
@ Pick the greatest appropriate way as your want.

five.RFQ
one. What is the acceptable MOQ?
For this,our acceptable MOQ is 10 pcs.
2. What is the Shipping time?
For samples,we usually have them in inventory, so the shipping and delivery time will be very brief .
For typical purchase, the shipping and delivery time ought to be in 2 months.
3.What is the appropriate payment expression?
Trade Assurance ,T/T, Western union, MoneyGram.
 

US $0.3-0.9
/ Piece
|
20 Pieces

(Min. Order)

###

Standard: DIN, GB
Material: Low Carbon Steel
Connection: Male
Head Type: Hexagon
Application: Hydraulic/Gas/Water
Transport Package: Plastic Packaging Box and Pallet

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Factory Stainless steel Hydraulic coupler quick joint quick release coupling
Material Stainless Steel, Carbon Steel
Body Type Straight, Elbow, 45 degree, 90 degree
Brand YC-LOK, or according to your requirements
Thread System Metric,ISO Tapered, NPT, BSPP, BSPT, JIS, SAE,UNF, G, R, JIC
Connection Surface Multiseal, Flat, Flat O-Ring, Cone Seat
Cleaning Process Standard Cleaning and Packaging
US $0.3-0.9
/ Piece
|
20 Pieces

(Min. Order)

###

Standard: DIN, GB
Material: Low Carbon Steel
Connection: Male
Head Type: Hexagon
Application: Hydraulic/Gas/Water
Transport Package: Plastic Packaging Box and Pallet

###

Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Factory Stainless steel Hydraulic coupler quick joint quick release coupling
Material Stainless Steel, Carbon Steel
Body Type Straight, Elbow, 45 degree, 90 degree
Brand YC-LOK, or according to your requirements
Thread System Metric,ISO Tapered, NPT, BSPP, BSPT, JIS, SAE,UNF, G, R, JIC
Connection Surface Multiseal, Flat, Flat O-Ring, Cone Seat
Cleaning Process Standard Cleaning and Packaging

Understanding the Different Types of Couplings

A coupling is a device that joins two rotating shafts together. It transmits power from one to the other and is designed to allow some amount of end-movement and misalignment. It is a simple mechanism that is extremely common in many industries. Learn more about couplings in this article.

Flexible coupling

When choosing the correct flexible coupling for your application, there are several factors to consider. One of the most important factors is backlash, which is the amount of rotational play introduced by moving parts. Other factors to consider include lubrication and accessibility for maintenance. Choosing the right flexible coupling can be challenging, but it is possible to find the right fit for your specific application.
A flexible coupling is an excellent choice for applications that require high alignment accuracy, which is essential for reliable system performance. These couplings can compensate for angular and parallel misalignment, ensuring proper positioning between the driving and driven shafts. In addition, flexible couplings are more affordable than most traditional couplings.
The most common flexible coupling is the elastomeric type, which uses a resilient material to transmit torque. These couplings can be made of plastic or rubber. In either case, they can be relatively lightweight compared to other types of couplings. Elastomeric couplings can also be used for high-speed applications.
Another important factor to consider when selecting the best Flexible Coupling is the pipe you’re connecting. Some couplings are easier to install than others, and some even have tapered edges to make them slide easily on the pipe. Regardless of the choice you make, it’s crucial to remember that proper installation is critical for reliability and safety.
gearbox

CZPT coupling

An CZPT coupling is a flexible, mechanical coupling that features a high degree of angular misalignment and eccentricity. They are available in different lengths, with MOL being the longest. They are ideal for applications that involve high parallel misalignment, limited assembly access, electrical insulation, and other conditions.
CZPT couplings are a versatile type of coupling, and they are often used to connect parallel shafts. They work by transmitting torque from one to the other using the same speed and rotation mechanism. They are available in various materials, including aluminum, brass, and polymers. In addition, they can work under high temperatures.
One of the main benefits of using an CZPT coupling is the fact that it does not require the use of a gearbox. These couplings are flexible, and their design allows them to cope with misalignment problems that may occur in power transmission applications. They are also able to absorb shock.
Another advantage of CZPT couplings is that they are suitable for systems with low-to-medium amounts of shaft misalignment. Because their friction is limited to the surface of the hubs, they are able to accommodate low bearing loads. CZPT couplings can also be used in systems with limited shaft access, since the disks are easily removed.

Clamped coupling

Clamped couplings are designed to provide a high-strength connection between two objects. A standard coupling has two parts: a nipple and a clamp sleeve. Each part is designed in such a way as to cooperate with each other. The sleeve and clamp are made of rubber. A reinforcing braid is often used to protect the exposed steel braid from rusting.
PIC Design provides a wide variety of standard clamping couplings for many different industries. These include medical, dental, military, laboratory, and precision industrial control equipment. They have a simple design that makes them ideal for these applications. Clamped couplings are also available for custom manufacturing. These couplings are available in metric, inch, and Metric.
The most common type of clamp coupling is a hose clamp. This type of coupling is used to connect two hoses or piping units. It consists of two conical binding sleeves that fit into the ends of the two parts. The coupling is then tightened with a screwdriver. It’s a versatile coupling because it allows two piping units or hoses to be joined together.
Another type of clamp coupling is the two-piece clamp coupling. The two-piece design allows for a quick and easy installation. Unlike other types of couplings, the clamp coupling is not necessary to remove the bearings before installing it. Its keyway is designed with shims in place so that it fits over the shaft. These couplings are available in different sizes, and they are made of steel or dutile iron.
gearbox

Helicoidal coupling

Helicoidal coupling is a form of nonlinear coupling between two molecules. It occurs when the molecules in a double helix are subjected to oscillations. These oscillations can occur either in the right or left-handed direction. These oscillations are called solitons. Helicoidal coupling can provide quantitative or qualitative support to a structure, such as an electron.

Split Muff coupling

The Split-Muff Coupling market report provides detailed market analysis and key insights. The study covers the market size, segmentation, growth and sales forecast. It also examines key factors driving the market growth and limiting its development. The report also covers current trends and vendor landscapes. Therefore, you can get a deep understanding of the Split-Muff Coupling industry and make the right business decisions.
The report also provides data on the competitive landscape and the latest product and technology innovations. It also provides information on market size, production and income. It also covers the impact of the COVID-19 regulations. The market report is a valuable resource for companies looking to expand their businesses, or to improve existing ones.
In terms of application, Split-Muff Couplings can be used in light to medium duty applications. They are shaped like a semi-cylindrical disc that fits over a shaft. Both parts are threaded for assembly and disassembly. It can be disassembled easily and quickly, and can be used for medium to heavy-duty applications with moderate speeds.
Split Muff couplings are the most popular type of couplings for transferring wet and abrasive materials. Their flanged end fits on most major brands of smooth material muff hoses. In addition, this type of coupling is corrosion-resistant and easy to install. It also does not require any adjustments to the drive shaft’s position.
gearbox

Flexible beam coupling

The Flexible beam coupling is one of the most popular types of couplings in the industry. It is comprised of two sets of parallel coils separated by a solid member, and it offers a wide range of torsional stiffness. These couplings are made of aluminum alloy or stainless steel. They offer excellent flexibility and are less expensive than many other types of couplings. They also require zero maintenance and can tolerate shaft misalignment.
Beam couplings are categorized into two types: helical and axial. The former is characterized by a high degree of flexibility, while the latter is used to compensate for higher misalignment. Both types are suitable for small torque applications and are available in a wide range of shaft sizes.
Flexible beam couplings are available in metric and US sizes, and feature a variety of options. They feature stainless steel or aluminum materials and are highly durable and corrosion-resistant. They also offer high torque capacities and excellent fatigue resistance. Flexible beam couplings are available with a wide range of options to meet your unique application needs.
China Factory Stainless Steel Hydraulic Coupler Quick Joint Quick Release Coupling     coupling brassChina Factory Stainless Steel Hydraulic Coupler Quick Joint Quick Release Coupling     coupling brass
editor by czh 2022-11-29

China best Flat face type quick CZPT | ISO A hydraulic quick CZPT | KZD 1/4 quick coupler | 5000PSI close type hydraulic Stainless Steel Quick CZPT with high quality

Solution Description

 

Item Description

Innovative tests gear:
Advanced testing tools can make certain merchandise high quality.

Creation Workshop:

Hydraulic Fitting /  Fast Coupling:

Liable management crew:

Applications:

The ZM -ISOASeries bring to the sector a proven design and style foruse on construction products, forestry gear, agricultural equipment, oil equipment, oil gear metal mill machinery, and other demanding hydraulic purposes.
Socket:

Plug:

Coupling Fitting:

Detailed Images

 

Neat production line:
Gemco’s a number of creation lines can guarantee the speedy generation of goods and make sure that the shipping and delivery time is not delayed!

Characteristics:

New valve design, it can resistance damage from substantial stream and the stress of impulse that providing sophisticated functionality.

·Poppet valves obtainable to avert uncoupled leakage.
·Poppet valves open up immediately when coupled, within rated working stress, to preserve the circulation expeditely.
·Critical components are hardened for durability.
·Dependable ball-locking system retains the mating halves jointly.
·Socket and plug are precision machined from strong bar stock.
·New Chrome plating treatment method provides innovative anti-rust efficiency
·ZM-ISOAseries conforms to the common of ISO7241-A.
·Compatible with PARKER6600 Sequence,FASTERANV Sequence,AEROQUIP5600 Collection and CZPT HA 15000 Series

Unified management warehouse:
Unified warehouse administration enables us to better manage customers’ products and make certain rapidly delivery!

Relevant Q&A: 

Q1. What type of products do you generate?

         A. Gemco was focused on the creation of substantial force ball valvesWith the detection and investigation of the wants of OEM customersfluid fields, Then Gemco started out to offer hydraulic method solutions.A range of products this kind of as fast coupling, hydraulic fitting, assembly and many others. 

Q2. Will you aid print the brand?

        A. Sure, we will print the brand in accordance to the diverse requirements of clients.

Q3. Can you make goods beneath my personal model?

        A. Sure, we have been offering OEM support for twenty several years.

This fall. How extended will it just take for my order to arrive?

      A. Normally it normally takes 5 to thirty times, it normally depends on your purchase quantity and our inventory.

IS0 PART N0 LS D HEX1 A T
6.3 ZM-1S0A-02SF 50 φ26 19 13 G1/4 NPT1/4
10 ZM-IS0A-03SF 57.1 φ31.5 22 16 G3/8 NPT3/8
12.5 ZM-IS0A-04SF 66 φ38.5 27 18 G1/2 NPT1/2
20 ZM-IS0A-06SF 82.5 φ48 34 20.5 G3/4 NPT3/4
25 ZM-1S0A-08SF 100 φ56 41 20.5 G1 NPT1

###

IS0 PART N0 LP d C HEX2 A T
6.3 ZM-1S0A-02PF 38.5 11.8 15 19 13 G1/4 NPT1/4
10 ZM-IS0A-03PF 39 17.3 19 22 16 G3/8 NPT3/8
12.5 ZM-1S0A-04PF 44 20.5 29 27 18 G1/2 NPT1/2
20 2M-1S0A-06PF 55 29 29 34 20.5 G3/4 NPT3/4
25 ZM-1S0A-08PF 66 34.3 35 41 20.5 G1 NPT1

###

IS0 PART N0 L D HEX1 HEX2 T
6.3 ZM-IS0A-02 74.2 φ26 19 19 G1/4 NPT1/4
10 ZM-IS0A-03 78.5 φ31.5 22 22 G3/8 NPT3/8
12.5 ZM-IS0A-04 88.2 φ38.5 27 27 G1/2 NPT1/2
20 ZM-IS0A-06 110.4 φ48 34 34 G3/4 NPT3/4
25 ZM-I S0A-08 132.9 φ56 41 41 G1 NPT1
IS0 PART N0 LS D HEX1 A T
6.3 ZM-1S0A-02SF 50 φ26 19 13 G1/4 NPT1/4
10 ZM-IS0A-03SF 57.1 φ31.5 22 16 G3/8 NPT3/8
12.5 ZM-IS0A-04SF 66 φ38.5 27 18 G1/2 NPT1/2
20 ZM-IS0A-06SF 82.5 φ48 34 20.5 G3/4 NPT3/4
25 ZM-1S0A-08SF 100 φ56 41 20.5 G1 NPT1

###

IS0 PART N0 LP d C HEX2 A T
6.3 ZM-1S0A-02PF 38.5 11.8 15 19 13 G1/4 NPT1/4
10 ZM-IS0A-03PF 39 17.3 19 22 16 G3/8 NPT3/8
12.5 ZM-1S0A-04PF 44 20.5 29 27 18 G1/2 NPT1/2
20 2M-1S0A-06PF 55 29 29 34 20.5 G3/4 NPT3/4
25 ZM-1S0A-08PF 66 34.3 35 41 20.5 G1 NPT1

###

IS0 PART N0 L D HEX1 HEX2 T
6.3 ZM-IS0A-02 74.2 φ26 19 19 G1/4 NPT1/4
10 ZM-IS0A-03 78.5 φ31.5 22 22 G3/8 NPT3/8
12.5 ZM-IS0A-04 88.2 φ38.5 27 27 G1/2 NPT1/2
20 ZM-IS0A-06 110.4 φ48 34 34 G3/4 NPT3/4
25 ZM-I S0A-08 132.9 φ56 41 41 G1 NPT1

Calculating the Deflection of a Worm Shaft

In this article, we’ll discuss how to calculate the deflection of a worm gear’s worm shaft. We’ll also discuss the characteristics of a worm gear, including its tooth forces. And we’ll cover the important characteristics of a worm gear. Read on to learn more! Here are some things to consider before purchasing a worm gear. We hope you enjoy learning! After reading this article, you’ll be well-equipped to choose a worm gear to match your needs.
worm shaft

Calculation of worm shaft deflection

The main goal of the calculations is to determine the deflection of a worm. Worms are used to turn gears and mechanical devices. This type of transmission uses a worm. The worm diameter and the number of teeth are inputted into the calculation gradually. Then, a table with proper solutions is shown on the screen. After completing the table, you can then move on to the main calculation. You can change the strength parameters as well.
The maximum worm shaft deflection is calculated using the finite element method (FEM). The model has many parameters, including the size of the elements and boundary conditions. The results from these simulations are compared to the corresponding analytical values to calculate the maximum deflection. The result is a table that displays the maximum worm shaft deflection. The tables can be downloaded below. You can also find more information about the different deflection formulas and their applications.
The calculation method used by DIN EN 10084 is based on the hardened cemented worm of 16MnCr5. Then, you can use DIN EN 10084 (CuSn12Ni2-C-GZ) and DIN EN 1982 (CuAl10Fe5Ne5-C-GZ). Then, you can enter the worm face width, either manually or using the auto-suggest option.
Common methods for the calculation of worm shaft deflection provide a good approximation of deflection but do not account for geometric modifications on the worm. While Norgauer’s 2021 approach addresses these issues, it fails to account for the helical winding of the worm teeth and overestimates the stiffening effect of gearing. More sophisticated approaches are required for the efficient design of thin worm shafts.
Worm gears have a low noise and vibration compared to other types of mechanical devices. However, worm gears are often limited by the amount of wear that occurs on the softer worm wheel. Worm shaft deflection is a significant influencing factor for noise and wear. The calculation method for worm gear deflection is available in ISO/TR 14521, DIN 3996, and AGMA 6022.
The worm gear can be designed with a precise transmission ratio. The calculation involves dividing the transmission ratio between more stages in a gearbox. Power transmission input parameters affect the gearing properties, as well as the material of the worm/gear. To achieve a better efficiency, the worm/gear material should match the conditions that are to be experienced. The worm gear can be a self-locking transmission.
The worm gearbox contains several machine elements. The main contributors to the total power loss are the axial loads and bearing losses on the worm shaft. Hence, different bearing configurations are studied. One type includes locating/non-locating bearing arrangements. The other is tapered roller bearings. The worm gear drives are considered when locating versus non-locating bearings. The analysis of worm gear drives is also an investigation of the X-arrangement and four-point contact bearings.
worm shaft

Influence of tooth forces on bending stiffness of a worm gear

The bending stiffness of a worm gear is dependent on tooth forces. Tooth forces increase as the power density increases, but this also leads to increased worm shaft deflection. The resulting deflection can affect efficiency, wear load capacity, and NVH behavior. Continuous improvements in bronze materials, lubricants, and manufacturing quality have enabled worm gear manufacturers to produce increasingly high power densities.
Standardized calculation methods take into account the supporting effect of the toothing on the worm shaft. However, overhung worm gears are not included in the calculation. In addition, the toothing area is not taken into account unless the shaft is designed next to the worm gear. Similarly, the root diameter is treated as the equivalent bending diameter, but this ignores the supporting effect of the worm toothing.
A generalized formula is provided to estimate the STE contribution to vibratory excitation. The results are applicable to any gear with a meshing pattern. It is recommended that engineers test different meshing methods to obtain more accurate results. One way to test tooth-meshing surfaces is to use a finite element stress and mesh subprogram. This software will measure tooth-bending stresses under dynamic loads.
The effect of tooth-brushing and lubricant on bending stiffness can be achieved by increasing the pressure angle of the worm pair. This can reduce tooth bending stresses in the worm gear. A further method is to add a load-loaded tooth-contact analysis (CCTA). This is also used to analyze mismatched ZC1 worm drive. The results obtained with the technique have been widely applied to various types of gearing.
In this study, we found that the ring gear’s bending stiffness is highly influenced by the teeth. The chamfered root of the ring gear is larger than the slot width. Thus, the ring gear’s bending stiffness varies with its tooth width, which increases with the ring wall thickness. Furthermore, a variation in the ring wall thickness of the worm gear causes a greater deviation from the design specification.
To understand the impact of the teeth on the bending stiffness of a worm gear, it is important to know the root shape. Involute teeth are susceptible to bending stress and can break under extreme conditions. A tooth-breakage analysis can control this by determining the root shape and the bending stiffness. The optimization of the root shape directly on the final gear minimizes the bending stress in the involute teeth.
The influence of tooth forces on the bending stiffness of a worm gear was investigated using the CZPT Spiral Bevel Gear Test Facility. In this study, multiple teeth of a spiral bevel pinion were instrumented with strain gages and tested at speeds ranging from static to 14400 RPM. The tests were performed with power levels as high as 540 kW. The results obtained were compared with the analysis of a three-dimensional finite element model.
worm shaft

Characteristics of worm gears

Worm gears are unique types of gears. They feature a variety of characteristics and applications. This article will examine the characteristics and benefits of worm gears. Then, we’ll examine the common applications of worm gears. Let’s take a look! Before we dive in to worm gears, let’s review their capabilities. Hopefully, you’ll see how versatile these gears are.
A worm gear can achieve massive reduction ratios with little effort. By adding circumference to the wheel, the worm can greatly increase its torque and decrease its speed. Conventional gearsets require multiple reductions to achieve the same reduction ratio. Worm gears have fewer moving parts, so there are fewer places for failure. However, they can’t reverse the direction of power. This is because the friction between the worm and wheel makes it impossible to move the worm backwards.
Worm gears are widely used in elevators, hoists, and lifts. They are particularly useful in applications where stopping speed is critical. They can be incorporated with smaller brakes to ensure safety, but shouldn’t be relied upon as a primary braking system. Generally, they are self-locking, so they are a good choice for many applications. They also have many benefits, including increased efficiency and safety.
Worm gears are designed to achieve a specific reduction ratio. They are typically arranged between the input and output shafts of a motor and a load. The two shafts are often positioned at an angle that ensures proper alignment. Worm gear gears have a center spacing of a frame size. The center spacing of the gear and worm shaft determines the axial pitch. For instance, if the gearsets are set at a radial distance, a smaller outer diameter is necessary.
Worm gears’ sliding contact reduces efficiency. But it also ensures quiet operation. The sliding action limits the efficiency of worm gears to 30% to 50%. A few techniques are introduced herein to minimize friction and to produce good entrance and exit gaps. You’ll soon see why they’re such a versatile choice for your needs! So, if you’re considering purchasing a worm gear, make sure you read this article to learn more about its characteristics!
An embodiment of a worm gear is described in FIGS. 19 and 20. An alternate embodiment of the system uses a single motor and a single worm 153. The worm 153 turns a gear which drives an arm 152. The arm 152, in turn, moves the lens/mirr assembly 10 by varying the elevation angle. The motor control unit 114 then tracks the elevation angle of the lens/mirr assembly 10 in relation to the reference position.
The worm wheel and worm are both made of metal. However, the brass worm and wheel are made of brass, which is a yellow metal. Their lubricant selections are more flexible, but they’re limited by additive restrictions due to their yellow metal. Plastic on metal worm gears are generally found in light load applications. The lubricant used depends on the type of plastic, as many types of plastics react to hydrocarbons found in regular lubricant. For this reason, you need a non-reactive lubricant.

China Roller chain and sprocket manufacturer 28680 chain vs belt drive bike China28622 in Port of Spain Trinidad and Tobago Tapered Roller Bearing for Automotive Lamp Food Packaging Machinery Transmission Crawler-Through Shot Blasting Machine Hydraulic Parts Chain Presses with ce certificate top quality low price

China Roller chain and sprocket manufacturer 28680 chain vs belt drive bike China28622  in Port of Spain Trinidad and Tobago  Tapered Roller Bearing for Automotive Lamp Food Packaging Machinery Transmission Crawler-Through Shot Blasting Machine Hydraulic Parts Chain Presses with ce certificate top quality low price

We – EPG Group the biggest Chain and agricultural gearbox factory in China with 5 various branches.

Ever-Energy Group CO., LTD. IS Expert IN Creating ALL Sorts OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Gear Pace REDUCERS, PARALLEL SHAFT HELICAL Gear REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Automobile GEARBOXES, PTO Push SHAFTS, Special REDUCER & Relevant Gear Factors AND OTHER Connected Items, SPROCKETS, HYDRAULIC Program, VACCUM PUMPS, FLUID COUPLING, Equipment RACKS, CHAINS, TIMING PULLEYS, UDL Pace VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Minimal BACKLASH WORM REDUCERS AND pto shaft, agricultural gearboxes SO ON. ISO Provider & High quality controlWe supply in depth drawings and supply whenever necessary.9001 licensed producer of precision roller chains. Types incorporate solitary and a number of strand, hollow pin, side bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. ISO 9001 licensed manufacturer of precision roller chains. Types incorporate single and numerous strand, hollow pin, facet bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless metal, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains.

Inch Sizes Tapered Roller Bearings
Solution Variety Bore Dia Outer Dia Internal Width Outer Width Width
(d) (D) (Bi) (Bo) (B)
11590/11520 .625 one.6875 .5625 .375 .5625
3062/3162 .625 1.625 .578 .4375 .5625
LM11749/LM11710 .6875 one.57 .575 .42 .545
21075/21212 .75 two.125 .8598 .625 .875
9067/9194 .75 1.938 .75 .6875 .9063
9074/9195 .seventy five 1.938 .848 .5625 .7813
A6075/A6157 .75 one.5745 .4391 .375 .473
LM11949/LM11910 .75 1.781 .655 .475 .61
9081/9196 .812 1.938 .848 .6875 .9363
M12649/M12610 .8437 one.9687 .seventy two .55 .sixty nine
LM12749A/LM12711 .8661 1.811 .655 .475 .61
LM12749/LM12710 .8661 one.781 .655 .475 .61
1380/1328 .875 2.0625 .794 .5625 .9125
1755/1729 .875 two.24 .781 .625 .7632
M12648/M12610 .875 1.9687 .seventy two .55 .69
3659/3620 .9375 two.4375 one.1975 .9375 1.one hundred twenty five
7097/7196 .9843 one.9687 .5614 .375 .549
5710S/7204  1 two.047 .5614 .five .591
15100/15243 one two.4375 .8125 .5625 .seventy five
15101/15244 one two.4409 .8125 .625 .8125
L44643/L44610 1 one.ninety eight .fifty eight .42 .56
M84249/M84210 one two.3437 .91 .seventy two .92
M84548/M84510 one 2.twenty five .765 .fifty eight .765
15103/15245 one.03 2.4409 .8125 .5625 .seventy five
15106/15245 one.0625 two.4409 .8125 .5625 .seventy five
L44649/L44610 1.0625 one.ninety eight .fifty eight .forty two .56
J15585/15520 one.1571 2.25 .6875 .549 .6875
15113/15245 one.a hundred twenty five two.4409 .8125 .5625 .seventy five
15590/15520 one.a hundred twenty five two.25 .6875 .549 .6875
1988/1922 one.125 2.twenty five .762 .625 .7813
L45449/L45410 one.1417 one.ninety eight .58 .42 .56
M86649/M86610 one.1875 2.5312 .8438 .6563 .9619
14124/14274 one.25 two.717 .771 .625 .7813
14125A/14276 one.25 2.717 .771 .625 .7813
15123/15250 1.25 2.5 .75 .625 .8125
15125/15250 one.twenty five two.5 .8125 .625 .8125
15126/15250X one.25 2.five .8125 .625 .8125
2580/2520 one.25 2.615 .9983 .8125 one
2582/2523 1.25 2.seventy five .9983 .seventy five .9375
HM88542/HM88510 one.twenty five two.875 one.571 .9063 one.1563
LM67047/LM67571 1.twenty five 2.328 .66 .465 .625
LM67048/LM67571 one.twenty five two.328 .66 .465 .625
LM67049A/LM67014 1.twenty five two.forty four .66 .465 .625
LM67049A/LM67571 1.25 two.328 .66 .465 .625
2785/2733 one.3125 two.963 1.01 .seventy five .9375
2790/2733 1.3125 two.963 1.01 .75 .9375
HM89443/HM89410 one.3125 three one.a hundred twenty five .9063 one.1563
M88047/M88571 one.3125 two.6875 .875 .6875 .875
M88048/M88571 1.3125 2.6875 .875 .6875 .875
14137A/14277 one.375 2.717 .771 .725 .8813
14138A/14277 one.375 two.717 .771 .725 .8813
16137/16282 one.375 two.8346 .8125 .5707 .748
25877/25820 one.375 2.875 .9688 .seventy five .9375
25878/25821 1.375 two.875 .9688 .75 .9375
2796/2733 one.375 two.963 1.01 .seventy five .9375
3379/3320 one.375 3.1562 1.1965 .9375 1.1563
3872/3821 1.375 three.375 1.1875 .9375 one.1875
3872/3820 1.375 3.375 one.1875 .9375 one.1875
HM89446/HM89410 1.375 3 1.a hundred twenty five .9063 1.1563
HM88649A/HM88610 one.375 2.8438 1 .7812 1
HM88649/HM88610 one.375 2.8438 one .7812 one
LM48548A/LM48511A 1.375 2.5625 .seventy two .67 .eighty three
LM48548/LM48510 one.375 two.5625 .72 .fifty five .seventy one
JL68145/JL68111-Z one.378 two.3622 .7288 .47 .625
L68149/L68110 one.378 two.328 .66 .forty seven .625
L68149/L68111 1.378 2.3622 .66 .forty seven .625
LM78349/LM78310A 1.378 two.4409 .6693 .5354 .6575
25880/25821 1.4365 two.875 .9688 .seventy five .9375
2780/2729 one.4365 three 1.01 .75 .9375
2794/2733 1.4365 two.963 one.01 .seventy five .9375
25570/25519 1.4375 3.twenty five 1.01 .seventy five .9375
26877/26820 1.4375 3.1955 1 .8125 1
3878A/3821 one.4375 3.375 one.1875 .9375 1.1875
3878/3821 1.4375 3.375 1.1875 .9375 one.1875
HM89448/HM89410 one.4375 three one.one hundred twenty five .9063 one.1563
HM89449/HM89410 1.4375 3 one.one hundred twenty five .9063 1.1563
JL69349/JL69310 1.4961 2.4803 .6693 .5315 .6693
13686/13620 1.5 2.717 one.571 .5983 .seventy five
16150/16282 one.5 two.8346 .8125 .561 .748
25572/25520 one.five three.265 1 .75 .9375
2776/2720 1.5 three 1.01 .seventy five .9375
2788/2733 1.five two.963 one.01 .seventy five .9375
3490/3420 one.5 3.one hundred twenty five one.1721 .9375 one.1563
3580/3525 one.five three.4375 1.216 .9375 1.1875
57410S/LM29710S 1.five 2.5625 .8322 .55 .seventy one
HM801346X/HM801310 one.five three.25 1.125 .9063 one.1524
HM801346/HM801310 1.five 3.twenty five 1.one hundred twenty five .9063 one.1524
LM29748/LM29710 one.5 two.5625 .seventy two .fifty five .71
LM29749/LM29711 1.5 two.5625 .72 .62 .seventy eight
JL6154/JL6285 one.5354 two.8352 .8125 .655 .8425
57414/LM300811 one.6142 2.6772 .7087 .5315 .689
LM300849/LM300811 1.6142 two.6772 .7087 .5315 .689
11162/11300 one.625 three .6845 .5625 .709
18590/18520 one.625 two.875 .6875 .5 .6562
24780/24720 one.625 3 .9063 .6875 .875
24780/24721 one.625 3 .9063 .8125 1
26882/26823 1.625 three 1 .8125 1
3576/3520 1.625 three.3125 1.216 .9375 one.1875
HM85716/HM85710 one.625 3.5 1.1563 .9063 one.1875
LM501349/LM501310 1.625 2.891 .seventy eight .58 .77
LM501349/LM501314 1.625 2.891 .78 .6537 .8437
M857148/M857111 1.625 three.twenty five 1.01 .795 1.045
12168/12303 one.6875 3.571 .675 .4688 .6875
25577/25521 1.688 3.27 one .seventy five .9375
12175/12303 1.75 three.571 .675 .4688 .6875
25580/25522 one.seventy five three.27 one .7525 .ninety four
25581/25523 1.75 3.265 one .875 one.0625
25582/25523 1.seventy five 3.265 one .875 1.0625
3782/3730 1.75 three.6718 1.193 .9375 one.1875
535/532A one.seventy five four.375 one.455 one.1875 1.five
535/532X 1.seventy five 4.25 one.455 1.a hundred twenty five one.4375
HM85719/HM85710 one.seventy five 3.five 1.1563 .9063 1.1875
3776/3727 1.771 three.6875 one.193 .9375 one.1875
17887/17831 one.7807 three.149 .8125 .5937 .7812
LM603049/LM603012 one.7812 three.0625 .7812 .6562 .8437
LM603049/LM603014 one.7812 three.1486 .7812 .5937 .7812
LM603049/LM6571 one.7812 3.0625 .7812 .594 .7812
LM157149/LM157110 1.7812 two.891 .seventy eight .sixty two .seventy seven
LM157149/LM157111 1.7812 two.891 .78 .6937 .8437
25590/25523 one.796 three.265 1 .875 one.0625
72187/72487 1.875 four.875 1.291 1 one.4375
3781/3730 one.9375 3.6718 1.193 .9375 one.1875
385/382 one.9685 3.875 .864 .7018 .8268
JLM104947A/JLM104910 1.9685 three.2283 .875 .6693 .8652
LM104948/LM104911 1.9685 three.twenty five .8465 .sixty five .eighty five
28580/28521 two 3.625 1 .7813 .9688
28678/28622b two three.8437 .9688 .7656 .9688
33889/33821 two 3.seventy five one.a hundred twenty five .875 1.571
368a/362a two three.5 .875 .6501 .8125
368/362 two 3.5433 .875 .625 .7874
3775/3720 two 3.6718 1.193 .9375 1.1875
3780/3730 2 three.6718 1.193 .9375 1.1875
3784/3730 two 3.6718 one.193 .9375 one.1875
LM104949E/LM104911 two three.25 1.019 .65 .85
LM104949/LM104911 2 3.twenty five .875 .65 .85
28584/28521 two.0625 3.625 one .7813 .9688
33891/33821 two.0625 three.75 1.one hundred twenty five .875 1.571
78215C/78551 2.one hundred twenty five 5.513 1.3085 .926 one.4375
527053/HM85711 two.1457 4.a hundred twenty five 1.4375 one.a hundred twenty five one.4375
HM8571/HM85711 two.1457 4.125 one.4375 one.125 one.4375
JLM506849/JLM506810 2.1654 3.5433 .9055 .7283 .9055
28680/28622 2.1875 three.8437 .9688 .7656 .9688
387AS/382S two.twenty five 3.8125 .864 .7982 1
387A/382A two.25 3.8125 .864 .625 .8268
390/394 two.twenty five four.3307 .866 .8661 .8661
462/453X 2.twenty five 4.one hundred twenty five one.1542 .9687 one.1875
29580/29520 two.3622 4.25 one .75 one
28985/28920 2.375 4 1 .7813 one
28985/28921 two.375 3.937 one .7813 one
HM813843/HM813810 two.4375 5 1.4375 1.0625 1.4375
29586/29522 two.5 four.twenty five one .seventy five one
390A/394A 2.5 four.3307 .866 .7411 .8661
3982/3920 two.5 four.4375 one.183 .9375 1.1875
HM212047/HM212571 2.five 4.8125 1.fifty one one.seventeen one.five
29590/29521 2.625 4.3307 one .75 one
3984/3925 two.625 four.4375 one.183 .9375 one.1875
3994/3925 two.625 4.4375 1.183 .9375 one.1875
HM212049/HM212011 2.625 four.8125 one.51 1.seventeen one.5
9278/9220 two.6875 six.375 1.8125 1.25 1.9375
33275/33462 2.seventy five four.625 one.1875 .9375 1.1875
33281/33472 2.8125 four.7244 one.1875 .923 one.173
29685/29620 two.875 four.4375 1 .seventy five 1
33287/33472 2.875 four.7244 one.1875 .923 one.173
575/572 3 five.5115 one.4212 1.125 1.4375
580/572 3.twenty five five.5115 one.4212 1.125 one.4375
595/593X 3.25 five.9055 1.forty three one.063 1.417
663/653 three.25 five.seventy five one.625 1.twenty five one.625
749A/742 three.25 five.909 1.8375 1.4375 1.seventy five
27690/27620 three.2813 4.9375 one .7813 one
JM716649/JM716610 3.3465 five.1181 1.1417 .9449 one.1811
749/742 three.3475 five.909 one.8375 one.4375 1.seventy five
HM518445/HM518410 three.five six 1.5625 1.1875 1.5625
HM218248/HM218210 3.5433 5.7874 one.5748 one.2795 1.5748
598A/593X 3.625 five.9055 1.43 1.063 1.417
594A/592A 3.seventy five 6 one.43 one.1875 one.5625
594R/593X three.75 5.9055 1.43 one.063 1.417
42381/42584 three.8125 five.8437 one.1406 .8438 one.one hundred twenty five
JM725719/JM725710 two 3.937 6.1571 one.378 one.1571 one.4173
37431/37625 four.3125 6.twenty five .844 .625 .9063
64450/64700 four.five seven 1.625 one.1875 1.625
799/792 five.0625 8.one hundred twenty five one.875 one.375 1.875
74550A/74850 five.5 eight.five 1.875 1.375 one.875
67989/67920 8.25 11.a hundred twenty five 1.8125 1.4375 one.8125

Manufacturing unit

Creation Workshop

Inspection

Warehouse

Software

 

The use of authentic tools manufacturer’s (OEM) element quantities or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the outlined replacement parts contained herein are not sponsored, accredited, or made by the OEM.

China Roller chain and sprocket manufacturer 28680 chain vs belt drive bike China28622  in Port of Spain Trinidad and Tobago  Tapered Roller Bearing for Automotive Lamp Food Packaging Machinery Transmission Crawler-Through Shot Blasting Machine Hydraulic Parts Chain Presses with ce certificate top quality low price

China Roller chain and sprocket manufacturer 28680 chain vs belt drive bike China28622  in Port of Spain Trinidad and Tobago  Tapered Roller Bearing for Automotive Lamp Food Packaging Machinery Transmission Crawler-Through Shot Blasting Machine Hydraulic Parts Chain Presses with ce certificate top quality low price

China Roller chain and sprocket manufacturer 28680 chain vs belt drive bike China28622  in Port of Spain Trinidad and Tobago  Tapered Roller Bearing for Automotive Lamp Food Packaging Machinery Transmission Crawler-Through Shot Blasting Machine Hydraulic Parts Chain Presses with ce certificate top quality low price

China Roller chain and sprocket manufacturer 28680 chain vs belt drive bike China28622  in Port of Spain Trinidad and Tobago  Tapered Roller Bearing for Automotive Lamp Food Packaging Machinery Transmission Crawler-Through Shot Blasting Machine Hydraulic Parts Chain Presses with ce certificate top quality low price

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : 9m 844RD Chain (Pintle Chain) in Sorocaba Brazil Hydraulic Mast LED Mobile Tower Light with Energy Saving with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : 9m 844RD Chain (Pintle Chain) in Sorocaba Brazil  Hydraulic Mast LED Mobile Tower Light with Energy Saving with ce certificate top quality low price

We – EPG Group the most significant Chain and agricultural gearbox manufacturing facility in China with 5 various branches. For a lot more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

We inspect each and every piece of bearing by ourselves just before shipping and delivery.Producer If you are interested in any of our products or would like to go over a possible buy, please feel free to make contact with us. of roller travel chains for power transmission apps from standard industrial to functions in specialized places such as foodstuff processing, heavy building equipment, and oil discipline solutions. Offered in double pitch generate and regular roller chains with one and a number of strand configurations. Specifications consist of .twenty five to 3 in. chain pitch, .13 to 1.88 in. length amongst sidebars, and .09 to .ninety four in. pin diameter. Accessible with functions these kinds of as situation-hardened and armor-cased pins, pre-stressed method, corrosion and shock resistance, and stainless metal components. Supplies put up-sale assist services. ISO 9001:2000 certified. Stocking distributor of energy transmission goods such as roller & several strand roller chains. Goods also include brakes, travel components, gears, torque limiters, U-joints, pulleys, sheaves, encoders, belt drives, clutches & motors are also available.

EPT MINE SPECIFICATION:
*Lockable battery isolator
* EPT basic safety valve on all cylinders
* EPT circuit protection switches
*Security warning decals
* EPT with inertial brake method on the axle
* EPT stabilizers
*Off street whee EPT with wheel indicators & all terrain 235/85R16 tyres
*50ºC ambient cooling
*StHangZhourd tow hitch 75mm pintle ring sort (3.5 ton) with Brake reservoir security bracket
*Weighty duty swing away jockey wheel in shape on the appropriate hand of draw bar
*Rugged mine spec chassis and cabin
*Off street suspension
*Cable observe
*LED visitors change and cease trailer lights
*Forklift pockets and central lift stage with certification power
*Tie down
*Jump start receptacle
*Gas evacuation tap
*7 pins spherical trailer plug
*Earth rod
*Rubber vibration dampers
*Metal fenders with mud flaps fitted  
*Highway protection chains with snap hook
*Hearth extinguisher
*Weatherproof lockable enclosure
*Wheel chocks on the outside of the trailer
*Reflective Mine Striping with yellow and black
*Higher water temperature and minimal oil force automobile shutdown technique
*Beacon
*Crisis stop without cap
*Admirer and belt guards
*PLC controller
Crucial Elements Specs
*Engine: EPT D905 or D1105 1500/1800rpm
*Generator: 48V DC 6kVA
*Commencing:12V DC
*Lights: 6×400W LED
*Tower: Hydraulic
*Gasoline tank:a hundred thirty L
Trailer dimension
*Dimension and Fat
*2450×1820×2160MM
*Wet weight:1960kgs
Trailer and Mast
*Very hot Dipped Galvanized Sub Framed & Mud Guards & Outriggers
*Outside Powder Coated Cover
*Twin Axles
*Tubeless Tyres 10 ply
* EPT Ma EPT Rotation
*Light Bar Tilt
*LED gentle of manage panel doorway and cabinet with car type swap
*Good quality of control panel door seal
* EPT design and style of above movement bottle frame
*E-quit
*Match ma EPT lock pin with holder
*Central lift and fork elevate and ma EPT receiver
*Large responsibility gas filter
*Versatile line with security of hydraulic brake line
* EPT tide up of exhau EPT
*Wheel nut indicator
*Offroad 235/85R16 wheel
*Jockey wheel mount on the of attract bar
*Brake reservoir security bracket
*IP66 lockable circuit breaker box
*75mm Pintle ring kind (3.5 ton)
*Tail light plug holder on the draw bar
*Four factors underneath the chassis or two details on the tower mast
*Reflectors and side lights
*Quantity plate mount and quantity plate light-weight
*A guard shall be put in above the exterior outlet of exhaust
*Air Filter Pre cleaner
*Openable Radiator for cleansing and obtain at rear panel
*Require Bund Evacuation details

BRIGHTER KLT-ten thousand(LED)Features
Brighter Mine Spec large obligation Mobile: +86~13083988828 lighting tower KLT-ten thousand(LED) is a market place chief in the layout, manufacturing and distribution of lighting solutions globally. Each tower characteristics the mo EPT dependable factors, with developed-in characteristics that assures highest light-weight output on your worksite and optimum productivity.
Why Brighter KLT-10000(LED)?

OUR Specialized Authorities Staff Service
If customisation specifications are what you are following, Our technological specialists group who can function with you to create bespoke solutions for your requirements.

CUSTOMISATION SPECIFICATION
We supply robu EPT and reputable goods for the mo EPT difficult and demanding applications. Our engineering team can custom-layout and manufacture bespoke gear to match any specification provided.

Reduced Procedure AND Routine maintenance Expenses
We believe in optimising efficiency and decreasing downtime to make ownership protected, easy and cost-efficient for you. We have refined our solution range through style, manufacturing and by servicing our possess products, which operates in the harshe EPT problems. We are proud to manufacture high quality items with diminished downtime and strength utilization, maintaining your operations and upkeep charges down.

BRO EPT AND Adaptable OPTIONAL CONFIGURATION
We supply an extensive range configuration of Lighting Towers, to meet up with and exceed client anticipations in all market segments.

Top quality Buyer Service AND AFTERSALES
Our manufacturer engines and alternators provider community entire world vast to make certain you can obtain experienced, expert and extremely competent specialists when you require them most.

Inventory AND EPT Ability
We realize quick turnaround is critical to you. Which is why our Light Tower stock plan offers you with fa EPT access to gear solutions when you require the most.

Our associates:
Kubota,Yanmar,Perkins,Stamford,Leroysomer,Meccalte,Deepsea,Smartgen.

Brighter KLT-8000 KLT-10000V KLT-8000 LED KLT-10000V LED KLT-ten thousand KLT-10000 LED
Gentle coverage m2 4.000
(typical 20 luxes)
four.000
(common twenty luxes)
five.000
(common twenty luxes)
5.000
(average twenty luxes)
6.000
(typical 20 luxes)
8.000
(typical 20 luxes)
Lamps Metal Halide Metal Halide LED LED Metallic Halide LED
Mast Laydown or Vertical Manual Vertical Hydraulic Laydown or Vertical Manua Vertical Hydarulic Laydown Hydarulic Laydown Hyraulic
Characteristics Powder coat cover Gull wing canopy Powder coat cover Powder coat canop Powder coat canop Powder coat canop
Performance Data            
Rated Frequency Hz 50 sixty fifty 60 50 sixty 50 sixty fifty sixty fifty one hundred twenty one hundred twenty 230 a hundred and twenty 230 a hundred and twenty 230 120 230 or DC48V
Rated Electricity (PRP) kW six eight six eight 45 4 five six greater 6
Working Temperature
(min / max)
ºC -twenty five/50
Seem Strain
Amount EPT Email hzpt@hzpt.com 1m(LPA)
dB(A) ninety ninety 89 ninety
Seem Energy EPT Email hzpt@hzpt.com 7m (LPA) dB(A) 65 sixty five sixty three sixty three seventy one seventy three 65
Motor              
Design   Kubota
D1105-E2BG/Kohler KDW 1003/ EPT 3TNV76/Perkins 403A-11G
Kubota
D1105-E2BG/Kohler KDW 1003/ EPT 3TNV76/Perkins 403A-11G
Kubota
Z482/D905/KDW 702/ EPT 2TNV70
Kubota
Z482/D905/KDW 702/ EPT 2TNV70
Kubta
D1105 or V1505
Kubota
D1105 or D905
Speed 1800 1500 Web Output
(PRP)
kW eight.4 5 eight.4 5 4five four five 8 9,5 eight.4
Coolant   Drinking water Drinking water Water Drinking water H2o Water
Variety of cylinders   3 3 two or three two or three three three
Alternator              
Design    SMU 132C  SMU 132C SMU 132B SMU 132B SMU 132D SMU 132C or DC48v
Rated output kVA 6 eight 6 8 4 5 four five eight 6
Insulation / Enclosure protection class
/ IP
H / 23 H / 23 H / 21 H / 23 H / 23 H / 23
Consumption              
Fuel tank ability litre 100 one hundred 70 70 130 one hundred thirty
Runtime before with lamps ON hrs 60 60 100 a hundred 90 65
Electrical power Output              
Auxiliary Power kW two 4 twofour 1 1 2 2 twothree
Lights              
Floodlights   Metallic halide Steel halide LED LED Metal halide LED
Wattage W 4 x one thousand four x a thousand 4 x 350 four x 350 four x 1500 6x 400
Mast              
Variety   Manual Hydraulic Manual Hydraulic Hydraulic Hydraulic
Rotation degrees 360 360 360 360 360 340
Greatest Peak M nine or 8 nine nine or 8 nine nine nine
Optimum Velocity wind km / h 80 eighty eighty eighty eighty 80
Enclosure and
Trailer
             
Sort   Ball or hitch repair or adjustable towbar or site trailer with leaf or rubber suspension
Enclosure   Steel canopy and powder coating paint
Dimensions and weigth              
Proportions in transportation Repair Towbar
(LxWxH)
m 1,9 x 1,29 x1,63 2,35 x 1,6 x 2,five one,sixty seven x 1,10 x 2,fifty 2,35 x 1,6 x 2,5 2,35 x 1,61 x 2,five 2,35 x 1,61 x 2,5
Weight kg 800 1150 850 1200 1860 1960

 

The use of unique tools manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our firm and the shown substitute components contained herein are not sponsored, accredited, or created by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : 9m 844RD Chain (Pintle Chain) in Sorocaba Brazil  Hydraulic Mast LED Mobile Tower Light with Energy Saving with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : 9m 844RD Chain (Pintle Chain) in Sorocaba Brazil  Hydraulic Mast LED Mobile Tower Light with Energy Saving with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : 9m 844RD Chain (Pintle Chain) in Sorocaba Brazil  Hydraulic Mast LED Mobile Tower Light with Energy Saving with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : 9m 844RD Chain (Pintle Chain) in Sorocaba Brazil  Hydraulic Mast LED Mobile Tower Light with Energy Saving with ce certificate top quality low price

Best China manufacturer & factory china in Kinshasa Democratic Republic of the Congo supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

EPG has set up a complete set of quality management system which is provided with advanced inspection and test equipment.

Overview

Quick Details

After Warranty Service:

Video technical support

Local Service Location:

Egypt

Showroom Location:

Egypt

Type:

parts

Main products include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler machines, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its accessories: Plow disc blades, harrowing film, plough tip and share, cultivator tine, casting parts etc.

EPG is a company specialized in the manufacture of the speed reducers for industry in general. From this idea, Mr. Alan began his activity in 1997. In small installations, the first gears and carcasses were manufactured and mechanized, while mounting the first reducers from mark EPG. With becoming to the years, we have passed from a small workshop of almost 150 meters to the new installation that occupy a surface of 5.800 meters. After-sales Service Provided:

Video technical support

Supply Ability

Supply Ability:
500000 Piece/Pieces per Year

Packaging & Delivery

Packaging Details
Carton or Plywood case or PALLET
Port
NINGBO/SHANGHAI, CHINA
Lead Time
:

A PTO shaft transfers the power from the tractor to the PTO powered attachment. This enables the tractor to power a variety of tractor implements including flail mowers, wood chippers, rotary tillers, excavators, and more.

Quantity(Bags) 1 – 50 >50
Est. Time(days) 15 To be negotiated

Online Customization

TYPE BMR-50
BMRW-50
BMRS-50
BMR-80
BMRW-80
BMRS-80
BMR-100
BMRW-100
BMRS-100
BMR-125
BMRW-125
BMRS-125
BMR-160
BMRW-160
BMRS-160
BMR-200
BMRW-200
BMRS-200
BMR-250
BMRW-250
BMRS-250
BMR-315
BMRW-315
BMRS-315
BMR-400
BMRW-400
BMRS-400
Displacement(ml/r) 51.7 80.5 100.5 126.3 160.8 200.9 252.6 321.5 401.9
Max.Pressure.Drop (Mpa) cont. 14 14 14 14 14 14 11 9 7
int. 17.5 17.5 17.5 17.5 17.5 17.5 14 11 9
peak. 20 20 20 20 20 20 16 13 11
Max.torque(N.m) cont. 93 152 194 237 310 369 380 380 380
int. 118 189 236 296 378 450 470 470 470
peak. 135 216 270 338 433 509 540 540 540
Max. Speed 
(cont.)(r/min)
770 745 595 475 370 295 235 185 150
Max.Flow(cont.)(L/mim) 40 60 60 60 60 60 60 60 60
Max.Output.Power(cont.)(Kw) 7 10 10 10 10 8 6 5 4
Weight(Kg) 6.5 6.9 7 7.3 7.5 8 8.5 9 11

 

china supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm

china supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpmchina supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpmchina supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpmchina supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

Best China manufacturer & factory china  in Kinshasa Democratic Republic of the Congo  supplier EPG motororbital hydraulic motor omthydraulic motor 1000rpm With high quality best price

factory made in China – replacement parts – in Karaj Iran EPT 30ton Hydraulic Mobile Truck Crane Qy30V532 EPT Lifting 30 Ton Hydraulic Mobile Crane with top quality

  factory  made in China - replacement parts -  in Karaj Iran   EPT 30ton Hydraulic Mobile Truck Crane Qy30V532 EPT  Lifting 30 Ton Hydraulic Mobile Crane with top quality

We – EPG Team the The Torq-Tender torque limiter is tamper-evidence. As soon as mounted, the torque value can’t be changed. This characteristic ensures the integrity of the machined layout, and renders pricey and perhaps dangerous calibration procedures unnecessary. Torque price is managed by the portion number that is ordered that value determines what spring is utilized for the duration of assembly of the torque limiter.biggest gearbox & motors , torque limiter couplings and gears manufacturing unit in China with 5 different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

New Lifting Machinery EPT 30ton Hydraulic Truck Crane Qy30V532
 

A truck crane featuring complete circle swinging, telescopic luffing jib and five-section growth topic to hydraulic proportional manage
A few-axle devoted chassis, broad eyesight, straightforward and generous decorations, 6× 4 generate
It adopts the most recent directional valve and quadruple gear pump system, with this sort of protection gadgets as overflow valve, harmony valve, hydraulic lock and brake valve equipped to avert oilway overload and steer clear of mishaps owing to pipe fracture, ensure that all actuators could give entire engage in to their wor ept capacity, and boost the technique trustworthiness and security
Such basic safety units as torque limiter and total lighting program are outfitted to guarantee protected and reliable operation, and aid operation at evening
The complete crane functions an progressive style, with its entire body, line and tint elegance built-in.

Item Benefit Remarks
Wor ept overall performance specification Max. rated overall lifting capacitykg 32000  
Max. load minute of fundamental boomkN.m 1132  
Max. load instant with max. main growth lengthkN.m 588  
Max. lifting height of simple boomm 11.1  
Max. lifting top of primary boomm 40.five Deformation of growth is not taken into thought.
Max. lifting top of fly jibm 48.five
Wor ept velocity Max. speed of one rope on principal winch m/min one hundred twenty The 4 th layer of drum
Max. velocity of solitary rope onauxiliary winch m/min one hundred The 2 nd layer of drum
Derric ept time of booms 40  
Tel: +86~13083988828escopic time of booms eighty  
Slewing speedr/min ~2.2  
Traveling specification Max. touring speedkm/h 78  
Max. gradeability% 37  
Min. turning circle diameter m 22  
Min. ground clearancemm 220  
Restrictions for exhaust pollutants and smoke Comply with connected specifications GB3847-2005

GB17691-2005 (Phase III)

Oil use per hundred kilometersL 45  
Mass specification Deadweight of crane in touring conditionkg 32000  
Full motor vehicle kerb mass kg 31870  
Front axle loadkg 7000  
Rear axle loadkg 25000  
Dimension specification General proportions (L×W×H)mm 12900×2500×3465  
Base on outriggersm five.36  
Length between outriggersm 6.1  
Primary boom lengthm 10.6~40.  
Primary growth angle° -2~80  
Fly jib lengthm eight  
Offset angle of fly jib° , thirty  
Chassis Model ZLJ5323 Function No: ZLJ5323V3.2

ZLJ5323V3.3T

Class II  
Engine Product WP10.270 QSC 260
Rated powerkW/r/min 199/2200 194/2200
Max. output torqueN.m/r/min 1100/1300~1600 1180/1500
Manufacturer ZOOMLION

 

The use of original products manufacturer’s (OEM) part numbers or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our organization and the shown replacement areas contained herein are not sponsored, accredited, or manufactured by the OEM.

  factory  made in China - replacement parts -  in Karaj Iran   EPT 30ton Hydraulic Mobile Truck Crane Qy30V532 EPT  Lifting 30 Ton Hydraulic Mobile Crane with top quality

  factory  made in China - replacement parts -  in Karaj Iran   EPT 30ton Hydraulic Mobile Truck Crane Qy30V532 EPT  Lifting 30 Ton Hydraulic Mobile Crane with top quality

  factory  made in China - replacement parts -  in Karaj Iran   EPT 30ton Hydraulic Mobile Truck Crane Qy30V532 EPT  Lifting 30 Ton Hydraulic Mobile Crane with top quality

Hydraulic near me China in Meerut India Breakers Female High Pressure Coupling with top quality

Hydraulic  near me  China  in Meerut India  Breakers Female High Pressure Coupling with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

EPT Breakers Female High Pressure Coupling

High pressure coupling features:

High pressure coupling is used for quick change of hydraulic too EPT in construction, railway maintenance and mining industries. The ease of cleaning makes them ideal for use in these types of hostile environments.

Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when the coupling is dragged along the ground. Sleeve mechanism is designed to help prevent dirt from entering the internal mechanism and thus avoid the faulty operation during connecting or disconnecting.

Critical parts are hardened for durability.

AN301 Series couplings employ flush valving when connecting or disconnecting. This means that the valves are mated together so that only small amounts of fluid would be lo EPT during disconnection or air inclusion during reconnection.

AN301 Series conforms to ISO5675.

Compatible with PARKER FE and EPT Series, STUC EPT A8008 Series,EROQUIP EPT 89 Series, HA EPT EPT QA2900 Series.

High pressure coupling specification:
 

Product Name High pressure coupling 
Material carbon steel,ss316, ss304
Treatment Cr6free Zinc
Thread NPT/BSP 
Connection Female 
Process CNC machining based on forged part or bar raw material
Used precision parts, machinery accessories, truck and auto parts, industrial parts,mining accessories, off-shore appliances, agricultral facilities, and construction material, etc…

Packing& Shipping:

packing: box/ pallet
shipping: express/ air/ sea 

About us: 


 

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Hydraulic  near me  China  in Meerut India  Breakers Female High Pressure Coupling with top quality

Hydraulic  near me  China  in Meerut India  Breakers Female High Pressure Coupling with top quality

Stainless near me shop China in Santa Marta Colombia Steel Two Pieces Type Hydraulic Hose Fitting Hose Coupling with top quality

Stainless  near me shop  China  in Santa Marta Colombia  Steel Two Pieces Type Hydraulic Hose Fitting Hose Coupling with top quality

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

HOT PRODUCTS
Two Piece Stainless Steel Hose Fittings & Ferrules
QC Hydraulics two piece style hose fittings and ferrules are compatible with Eaton designs, which meet SAE, JS, BSP, DIN & ISO Specs. The ferrule used with two-piece fittings allows greater flexibility in hose selection and connection, including 1SN, 2SN and multi-spiral hoses which allow for multiple two-piece fitting and ferrule options to accommodate the specific application.

TECHNICAL SUPPORT
We do have the abilitly to design C EPT drawings/prints for approval when confirming the order before mass production.

PRODUCTS PROCESS

OUR CERTIFICATE

EXHIBITION

PACKAGING & SHIPPING METHOD

COMPANY PROFILE
QC Hydraulics was found in 1999, with 20 years machining experience, parts are produced meeting ISO 9001 quality standards and conform to SAE, BS, ISO and DIN norms. Our core focus are stainless steel hydraulic fittings & stainless steel braided PTFE hose assembly. Currently we are the supplier for many of famous distributors, wholesalers and EPT manufacturers in North America and Europe. All they are very EPT manufacturers and distributors in their local market. 
QC Hydraulics aims to help clients for savings. Saving worry, saving time and saving money. Our goal is to be the NO.1 supplier of stainless steel hydraulic fittings and adapters in 10 years in China. 

HOW WE CONTROL QUALITY

1. Fir EPT Article Inspection During Process
1).The operator make the fir EPT article according to manufacturing drawings. 
2). The operator will inspect the fir EPT article and record. If the sizes and threads meet the manufacturing drawings, and then the fir EPT article will be put in a special box( the box is for fir EPT article only).
3). Workshop foreman will take second inspection for the fir EPT article.
4). Only passing the inspection by workshop foreman, and then start with mass production.

2. Mass Production After Fir EPT Article Inspection
1).After the fir EPT article approved by operator and workshop foreman, and then start with mass production.
2). During mass production, the operator needs to inspect the threads every 10 pieces, and measure the sizes every 15 pieces. Once any fittings of threads and dimensions out of the specs, all this batch of fittings will be inspected completely.
3). The qualified fittings will be fitly put in a plastic box piece by piece.
4). Finally, the finished fittings will be transported to inspection department for final inspection.

3. Final Inspection
1). Appearance 100% inspection under strong light. No scratch, No burr.
2). Key sizes and angles 15-20% randomly inspection by callipers and contracer. Once any sizes and angles of fittings out of specs or doesn’t respect to drawings, this batch of fittings will be forced to return back to production workshop to improve or make a new replacement.
3).Threads 15-20% randomly inspection by right gages. Once any threads out of specs or doesn’t respect to drawings, this batch of fittings will be forced to return back to production workshop to improve or make a new replacement.
FAQ

Q: Are you trading company or manufacturer ?

A: We are 100% manufacturer.

Q: How long is your delivery time?

A: About 45 days for common orders. But it depends on the order volume/quantity. Of course, if you have an urgent order, we will try be EPT to meet you.  

Q: Do you provide samples ? Is it free or extra ?

A: Sample is free, we have the budget every year.

Q: What is your terms of payment ?

A: Normally 30% deposit, balance before shipment or again EPT BOL copy. Payment is Negotiable.

Q: Do you offer EPT service and can you produce as our drawings or samples?

A: Yes. We offer EPT service. Our mo EPT fittings same as Parker and Eaton designs, and meet SAE, DIN, ISO,BS specification. We also produce big quantity fittings according to our clients drawings and exact samples.

Q:What is the application for your fittings?

1 – Oil and gas industry

2 – Extraction system

3 – Petro and chemical industry

4 – EPT facility and system

5 – Water and liquid system

6 – Marine, Military Defense Industry

7 – Building construction

8 – Shipbuilding industry

9 – Mining Equipment

10 – Trucks & Transportation

11 – Food Processing Finally, we do appreciate you attention to our company and our product: stainless steel hydraulic hose fitting and adapters

We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Stainless  near me shop  China  in Santa Marta Colombia  Steel Two Pieces Type Hydraulic Hose Fitting Hose Coupling with top quality

Stainless  near me shop  China  in Santa Marta Colombia  Steel Two Pieces Type Hydraulic Hose Fitting Hose Coupling with top quality