worm reduction

Our standard 700 Series – the heart of Ever-Power speed reducer products – has been serving industry reliably for over 10 years. Its proven modular design has set the sector standard for overall performance and is the most imitated item in the current worm gear velocity reducer marketplace. But why settle for a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes have earned a status to be a business benchmark worldwide. Our achievement originated from our relentless drive for quality with state-of-the-artwork technology, all while offering worm gearboxes are affordable prices. High flexibility accorded through a broad choice of mounting choices, shaft configurations and electric motor interfaces, makes the Ever-Power worm gearbox the default choice for the sector. The helical-worm and the double-worm edition, with or without the torque limiter, add up to the advantage, creating a highly versatile drive system.
Ever-Power Worm gearboxes provide high torque with low acceleration gear ratio. Being simple and compact in design, these gears can achieve higher gear ratio compared to the helical gears. These worm decrease gears having screw type characteristics act like helical gears, but its helix angle is typically comparatively larger) and its body is normally quite lengthy in the axial path. The gears in these gearboxes can be correct or left-handed dependant on the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Obtainable in Solid shafts (one or double), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a type of interlocking gear made up of a worm shaft and worm wheel. The worm is shaped like a screw and the worm wheel is certainly a type of gear machined to get a tooth profile with the same configuration.
The operation of a worm gear is comparable with that of a bolt and nut. The principle is the same as a nut that is fixed to ensure that it cannot rotate and for that reason progresses in the axial direction when the bolt can be turned.
The design of a worm gear is considered through the relationship between the rack and spur gear on the middle plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel by one tooth. Due to this, in a 1 speed decrease gears, the wheel could be manufactured so that it will be rotated 1/60 (1/120 in special applications).
Orthogonal shaft The shafts are aligned orthogonally due to the structure. This feature makes it possible to layout the turning transmission direction at the right angle.
The arbitrariness of the rotation direction The screw direction of the worm can be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation path of the worm wheel by changing the screw direction.
A multitude of shaft layouts The wide selection of shaft layouts is among the top features of interlocking gears.For example, right shaft output, remaining shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Body 2) and, if attachment orientations are included, it is possible to pick from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel can be characteristic because the contact is certainly linear and the relative slide is excellent. In comparison to rolling power transmission, noise and vibration are really low. For this reason, this technology is used to drive medical apparatus, elevators and escalators, etc.
The principal specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when selecting a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the manufacturer catalogs and the series and models should be selected according to those procedures. Particular care ought to be taken in essential areas such as for example selecting the strain index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm reduction gears, heat produced during the initial period of make use of is high and running-in procedure at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently attaining the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to change the lubricating oil and also to change the lubricating oil after that about 1 time per year according to the procedure manual offered by the manufacturer.
Product Description
The Worm Decrease Gear Box is supplied by our company is of supreme quality. Our products are made by using premium quality materials and advance technology at our vendors end. They are widely used in various sectors. Our items are easily available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Body, Flange Mount.
Choice B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Mount.
High efficiency and safe operation. High load capacity and overload functions. Output Torque = (Power (kW) x 9550 (Constant))/ Gearbox output speed (rpm).
Higher ratios on request reliant on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute versatility is given by the wide choice of several mounting options, shaft configurations and motor interface, all offered as regular. The helicalworm and the doubleworm version, with or without the torque limiter, also accumulate, creating a highly versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 degree C TO 80 degree C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears come in two series: X and H.
The series X, featuring a worm and worm wheel set, is available in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell housing + coupling) provides great versatility to suit a broad range of applications and higher efficiency compared to the compact collection XC, where in fact the emphasis is on space performance.
Series H offers the same features since series X with an added plus: a spur equipment pre-stage at the insight end provides higher overall performance and a broader range of ratios than the X series.
Frame sizes 110 and 90 feature a cast-iron housing cast enbloc, whereas smaller sizes make use of die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy metal and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow result shaft comes as standard.
Broad range of options available:
second input, output flange, single or dual extension result shaft, torque limiter with through cable, torque arm.